The ZSSC5101 is a CMOS integrated circuit for converting sine and cosine signals obtained from magnetoresistive bridge sensors into a ratiometric analog voltage with a user-programmable range of travel and clamping levels. The ZSSC5101 accepts sensor bridge arrangements for both rotational as well as linear movement. Depending on the type of sensor bridge, a full-scale travel range of up to 360 mechanical degrees can be obtained. Programming of the device is performed through the output pin, allowing in-line programming of fully assembled 3-wire sensors. Programming parameters are stored in an EEPROM and can be re-programmed multiple times. The ZSSC5101 is fully automotive-qualified with an ambient temperature range up to 150°C for SSOP-14 or 160°C for die.


  • Ratiometric analog output
  • Up to 4608 analog steps
  • Step size as small as 0.022°
  • Programming through output pin via one-wire interface
  • Offset and amplitude calibration of the bridge input signals
  • Programmable linear transfer characteristic: zero position, angular range, upper and lower clamping levels, rising or falling slope
  • Loss of magnet indication with programmable threshold level
  • Accepts anisotropic, giant, and tunnel magnetoresistive bridge sensors (AMR, GMR and TMR)
  • Programmable 32-bit user ID
  • CRC, error detection, and error correction on EEPROM data
  • Diagnostics: broken-wire detection
  • Automotive-qualified to AEC-Q100, grade 0

Product Options

下单器件 ID Part Status Pkg. Code Pkg. Type Lead Count (#) Temp. Range Carrier Type Buy Sample
ZSSC5101BE1C Active DICEF WAFER 0 -40 to 160°C Wafer
ZSSC5101BE4R Active PYG14 SSOP 14 -40 to 160°C Reel
ZSSC5101BE4T Active PYG14 SSOP 14 -40 to 160°C Tube
ZSSC5101BE1B Active DICE WAFER 0 -40 to 160°C Wafer
ZSSC5101BE2B Active DICE WAFER 0 -40 to 160°C Wafer
ZSSC5101BE3B Active DICE WAFER 0 -40 to 160°C Wafer


文档标题 他の言語 文档类型 文档格式 文件大小
ZSSC5101 Short-form Datasheet Short Form Datasheet PDF 80 KB
ZSSC5101 Datasheet Datasheet PDF 480 KB
Choosing the Right Sensor Signal Conditioning IC Guide PDF 300 KB
IDT CAD Altium Libraries for AID Products Rev 20160819 Guide ZIP 1.20 MB
ZSSC5101 Evaluation Kit Description Manual PDF 769 KB
应用指南 &白皮书
IDT Wafer Dicing Guidelines Application Note PDF 44 KB


文档标题 他の言語 文档类型 文档格式 文件大小
ZSSC5101 Evaluation Kit Software Rev. 1.0 Software ZIP 25.98 MB

Evaluation Boards

Part Number Title 升序排列
ZSSC5101KIT Evaluation Kit for ZSSC5101